Products for Electrical and Electronics, Insulation Coating, Battery Terminal Protection, Contact Gel, Antistatic Coating, Gasket Removers, MoS2 Base High Performance Grease, Electronic Component & Contact Cleaners

Insulation Coating :

• Single component, no mixing
• Easy application by brush or spray
• Dries Quickly & offer hard, tough film
• Excellent Dielectric Strength in single coat application
• Excellent corrosion resistance
• Excellent heat resistance
• Excellent moisture & humidity resistance
• Dielectric Strength up to 35 KV

Varnish, Paint & Coating Removers :

• Non flammable CO2 Propellant
• Easily removes paints, varnish & enamels
• Non-Dripping, no wastages
• No scraping, No sanding, No wire brushing
• Non corrosive to metal
• Extremely suitable for vertical surfaces

Battery Terminal Protection :

• Excellent resistance to acidic fumes
• Prevent Oxidation & sulfating
• Prevent current loss
• Stops bi-metallic corrosion
• Does not peel off
• Never cures

Contact Gel :

• Excellent resistance to moisture
• Excellent UV resistance
• Protection from flashovers
• Maintain good electrical contacts

Antistatic Coating :

• Prevents damage of electrical components from static current
• Maintain the original electrical properties for longer periods
• Fully transparent
• Excellent bonding

Anticorrosive Gel :

• Specially recommended for threaded assemblies &Precision non
• Moving parts, fasteners, studs
• Excellent water resistance
• Excellent oxidation resistance
• Excellent chemical resistance
• Sustains high pressures
• Reduces wear & facilitates future disassembly
• Prevents bi metallic corrosion
• No rusting, no corrosion, no seizing
• Lower maintenance cost & down time
• Save the cost of rust looseners, Penetrating oils
• Very economical for common applications
• Free from nickel, graphite, copper, lead

MoS₂   Base High Performance Grease :

• Contains micro fine MoS2
• Excellent thermal stability
• High structural & oxidation stability
• Extended re-lubrication intervals
• Increases bearing life
• Temperature Range: -50 ⁰C to 250 ⁰C

High Speed Grease :

• Excellent adhesion at high speed
• Excellent Temperature resistance up to 180 ⁰C
• Contains Pure MoS₂
• DN Value = 2,00,000

Shock Absorber & Noise Reducers :

• Sustain heavy impact loads
• Reduces vibration · Reduces noise
• Excellent resistance to viscosity degradation
• Excellent mechanical & thermal stability
• Excellent chemical resistance
• Extraordinary adhering properties
• Low heat generation
• Non-corrosive to all metals, non-metals

Electronic Component & Contact Cleaners :

• Non flammable CO2 Propellant
• Removes oxidation deposits
• Remove carbon, oil, grease & sticky deposits, soils & forbidden contaminants
• Displaces moisture
• Prevent rusting
• Non harmful to most of the plastic 
• Free from toxic solvents
• Non conductive

I. C. / S. M. D. Cleaners :

• Non flammable CO2 Propellant
• Displaces Moisture· Excellent cleaning action
• Fast Drying
• Non harmful to sensitive electronic components
• Non harmful to insulation
• Does not leave any residue on surface
• Non harmful to plastic, rubber
• Does not create static charges
• Non-corrosive

Rust Penetrant / Rust Looseners :

• Non flammable CO2 Propellant
• Excellent Penetration Power
• Lubricates threaded assemblies
• Reopens seized assemblies
• Stops further rusting
• Displaces moisture
• Non- corrosive to all metals

Gasket Removers :

• Non flammable CO2 Propellant
• Easily Removes precut old gaskets
• Non-dripping, suitable for vertical surfaces
• Removes chemical gaskets & sealant
• Eliminates excessive scraping & sanding
• Reduces potential damages to flanges
• Removes adhesives & sticky forbidden contaminants
• Non-harmful to metal